# MGX-445040-S5 4.4 – 5.0 GHz, 10 W GaN-on-SiC Power Amplifier

## Description
The MGX-445040-S5 is a packaged single-stage C-band GaN-on-SiC linear power amplifier delivering 40 dBm (10 W) of saturated power with 13.0 dB of small signal gain. It can be used as a final stage PA for portable radio applications including MANET or UAVs, or a high-power driver for 5G NR cellular infrastructure.

RF ports are nominally matched to 50 Ω for ease of use, with integrated DC blocking capacitors at RF input and output.

5 x 5 mm AQFN-32L Package

The active device is fabricated using a state-of-the-art GaN-on-SiC process and packaged in a small form factor, 5 x 5 mm thermally enhanced plastic air-cavity QFN.

## Product Features
- Frequency range 4.4 - 5 GHz
- Saturated output power 40 dBm
- Small signal gain 13.0 dB
- RF ports matched to 50 Ω and DC blocked
- Power added efficiency 55 % @ P3dB
- DC bias 56 mA @ +28 V

## Applications
- MANET (Portable Ad-hoc NETwork)
- UAV datalink
- 5G NR cellular infrastructure (n79 band)

## Block Diagram
N/C     VGG   N/C   N/C   N/C   VDD   VDD   N/C

32     31    30    29    28    27    26    25

N/C    1                                                      24    N/C  
N/C    2                                                      23    N/C  
RF_IN   3                                                      22   RF_OUT  
GND     4                                                      21    GND  
N/C    5                                                      20    N/C  
N/C    6                                                      19    N/C  
N/C    7                                                      18    N/C  
N/C    8                                                      17    N/C  

9      10    11   12     13    14   15    16

N/C    N/C   N/C   N/C   N/C   N/C   N/C   N/C   GND

## Ordering Information
| Part Number | Description |
|---|---|
| MGX-445040-S5 | Tape and Reel |
| MGX-445040-S5EV | Evaluation Board |

© 2026 cmlmicro.com  
Page 1  
D/445040/1  
October 2026

---

## Absolute Maximum Ratings
| Parameter | Rating |
|---|---:|
| RF Input Power | +32 dBm |
| Device Voltage (Vd) | +28 V |
| Power Dissipation (Pdiss) | 20 W (Tc = 85 °C) |
| Junction Temperature (Tjmax) | 225 °C (MTTF >1 x 106 hours) |
| Storage Temperature | -40 to +125 °C |

Exceeding the maximum ratings may result in damage or reduced device reliability.

## Thermal Characteristics
| Parameter | Rating |
|---|---:|
| Thermal Resistance (Rjc) | 3.6 °C / W (Tc = 85 °C) |

Thermal resistance is junction-to-case, where case refers to the exposed die pad on the backside which is in contact with the board.

## Recommended Operating Conditions
| Parameter | Min | Typ | Max | Units |
|---|---:|---:|---:|---|
| Operating Frequency Range | 4.4 |  | 5 | GHz |
| Case Temperature (Tc) | -40 |  | +85 | °C |
| Device Voltage (Vd) |  |  | 28 | V |
| Gate Voltage (Vg) | -4.5 | -2.35 | -2.2 | V |
| Quiescent Current (Idq) |  | 56 |  | mA |
| Power down Voltage (Vg) |  |  | -3 | V |

The device is tested under certain conditions, but performance is not guaranteed over the full range of recommended operating conditions.

## ESD Caution
High-performance RF integrated circuits are highly sensitive to electrostatic discharge (ESD) and may contain unprotected inputs and outputs. Handling and assembly should be conducted in an ESD-controlled environment. It is recommended that ESD precautions and protocols are adopted to minimise the risk of electrostatic discharge and protect product integrity.

© 2026 cmlmicro.com  
Page 2  
D/445040/1  
October 2026

---

## Electrical Specification
Results taken on the MGX-445040-S5EV, where board losses have been de-embedded using TRL calibration.

Vd = 28 V, Idq = 56 mA, Ta = +25 °C and Zo = 50 Ω (unless otherwise noted)

| Parameter | Conditions | Min | Typ | Max | Units |
|---|---|---:|---:|---:|---|
| Frequency |  | 4.4 |  | 5 | GHz |
| Small Signal Gain | 4.4 GHz |  | 13 |  | dB |
|  | 4.7 GHz |  | 13.5 |  | dB |
|  | 5 GHz |  | 13.5 |  | dB |
| Reverse Isolation | 4.4 GHz to 5 GHz |  |  | -27 | dB |
| Psat (P3dB) | 4.7 GHz |  | 40 |  | dBm |
| PAE | At saturated Pout, 4.7 GHz |  | 55 |  | % |
|  | Average. Pout = 33 dBm / tone. |  |  |  |  |
| OIP3 | At 4.7 GHz. Tone Spacing = 20 MHz |  | 45 |  | dBm |
|  | Avg. Pout = 32 dBm, at 4.7 GHz |  |  |  |  |
| ACPR | 256-QAM, RRC = 0.1, PAPR ~ 7.8 dB |  |  | 35 | dBc |
|  | Symbol Rate = 16.8 Ms/s |  |  |  |  |
|  | Avg. Pout = 32 dBm, at 4.7 GHz |  |  |  |  |
| EVM | 256-QAM, RRC = 0.1, PAPR ~ 7.8 dB |  |  | 3 | % |
|  | Symbol Rate = 16.8 Ms/s |  |  |  |  |
| Input Return Loss | 4.4 GHz to 5 GHz |  |  | 10 | dB |
| Output Return Loss | 4.4 GHz to 5 GHz |  |  | 10 | dB |
| Gate Voltage (Vg) | Idq = 56 mA, No RF Input |  | -2.4 |  | V |
| Standby Current (Id) | Vg = -4.5 V, No RF Input |  |  | 100 | µA |
| Drain Current (Id) | At Psat, 4.7 GHz |  | 670 |  | mA |
| Gate Current (Ig) | Idq = 56 mA, Vd = 28 V |  |  | 20 | µA |

© 2026 cmlmicro.com  
Page 3  
D/445040/1  
October 2026

---

## Pin Assignments

N/C     VGG   N/C   N/C   N/C    VDD   VDD   N/C

32      31    30    29    28    27    26   25

N/C      1                                                                  24   N/C  
N/C      2                                                                  23   N/C  
RF_IN     3                                                                  22   RF_OUT  
GND       4                                                                  21   GND  
N/C      5                                                                  20   N/C  
N/C      6                                                                  19   N/C  
N/C      7                                                                  18   N/C  
N/C      8                                                                  17   N/C  

9        10   11   12     13   14   15   16

N/C      N/C  N/C  N/C   N/C  N/C  N/C  N/C  GND

Figure 1 - Top View

### Table 1 - Pin Assignments
| Pin | Name | Description |
|---:|---|---|
| 3 | RF_IN | RF input, nominally 50 Ω with integrated DC-blocking capacitor. |
| 4, 21 | GND | DC and RF Ground |
| 1, 2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 23, 24, 25, 28, 29, 30, 32 | N/C | No connection (or connect to GND) |
| 22 | RF_OUT | RF output, nominally 50 Ω with integrated DC-blocking capacitor. |
| 26, 27 | VDD | Drain voltage |
| 31 | VGG | Gate voltage |
| Die pad | GND | DC and RF ground. Exposed die pad must be connected to GND. |

Notes  
The bottom exposed die pad must be connected to the ground plane on the board for electrical and thermal reasons, so a good connection is critical. Attention should be paid to the solder paste design to ensure that there isn’t too much solder on the ground area thus causing the device to float and resulting in poor placement of part. See later section with recommended land pattern.

© 2026 cmlmicro.com  
Page 4  
D/445040/1  
October 2026

---

## Typical Performance
The following plots show typical performance characteristics of MGX-445040-S5 measured on the evaluation board (Part Number MGX-445040-S5EV). Board losses have been de-embedded from the measurement results using TRL calibration.

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56 mA, Ta = 25 °C (unless stated otherwise) and Zo = 50 Ω. Pulse width = 100 µs and duty cycle = 10 %.

Figure 2 - Pout vs Pin at 4.4 GHz  
Figure 3 - PAE vs Pout at 4.4 GHz  
Figure 4 - Pout vs Pin at 4.7 GHz  
Figure 5 - PAE vs Pout at 4.7 GHz  
Figure 6 - Pout vs Pin at 5.0 GHz  
Figure 7 - PAE vs Pout at 5.0 GHz

© 2026 cmlmicro.com  
Page 5  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56 mA, Ta = 25 °C (unless stated otherwise), Zo = 50 Ω. Pulse width = 100 µs and duty cycle = 10 %.

Figure 8 - PAE vs Pout  
Figure 9 - Gain vs Pout  
Figure 10 - PAE @P3dB vs Frequency  
Figure 11 - Pout @P3dB vs Frequency

© 2026 cmlmicro.com  
Page 6  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56 mA, Ta = 25 °C (unless stated otherwise), Zo = 50 Ω. Pulse width = 100 µs and duty cycle = 10 %.

Figure 12 - Gain vs Pout at 4.4 GHz  
Figure 13 - Gain vs Pout at 4.7 GHz  
Figure 14 - Gain vs Pout at 5.0 GHz  
Figure 15 - Ids vs Vgs  
Figure 16 - Pout @ P3dB vs Frequency  
Figure 17 - PAE @ P3dB vs Frequency

© 2026 cmlmicro.com  
Page 7  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Ids = 56 mA, Ta = 25 °C, Zo = 50 Ω. 256-QAM, RRC = 0.1, Symbol rate – 16.8 Ms/s, PAPR ~7.8 dB (CCDF – 0.01%)

Figure 18 - EVM vs Pout  
Figure 19 - ACP1_U vs Pout  
Figure 20 - ACP1_L vs Pout  
Figure 21 - PAPR vs Pout

© 2026 cmlmicro.com  
Page 8  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56mA, Ta = + 25 °C, Zo = 50 Ω.

Figure 22 - OIP3 vs Pout  
Figure 23 - IM3 vs Pout  
Figure 24 - PAPR vs Pout  
Figure 25 - IMD5 vs Pout

© 2026 cmlmicro.com  
Page 9  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56mA, Ta = + 25 °C, Zo = 50 Ω.

Figure 26 - Input Return Loss, S11  
Figure 27 - Reverse Isolation, S12  
Figure 28 - Small Signal Gain, S21  
Figure 29 - Output Return Loss, S22

© 2026 cmlmicro.com  
Page 10  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56mA, over varying temperature, Zo = 50 Ω.

Figure 30 - Input Return Loss, S11  
Figure 31 - Reverse Isolation, S12  
Figure 32 - Small Signal Gain, S21  
Figure 33 - Output Return Loss, S22

© 2026 cmlmicro.com  
Page 11  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56mA, over varying temperature, Zo = 50 Ω.

Figure 34 - Input Return Loss, S11  
Figure 35 - Reverse Isolation, S12  
Figure 36 - Small Signal Gain, S21  
Figure 37 - Output Return Loss, S22

© 2026 cmlmicro.com  
Page 12  
D/445040/1  
October 2026

---

Test conditions unless otherwise noted  
Vd = 28 V, Idq = 56mA, over varying temperature, Zo = 50 Ω.

Figure 38 - Input Return Loss, S11  
Figure 39 - Reverse Isolation, S12  
Figure 40 - Small Signal Gain, S21  
Figure 41 - Output Return Loss, S22

## Application Information
IMPORTANT: Bias Procedure

The MGX-445040-S5 device is depletion mode and requires the (negative) gate bias to be applied before the (positive) drain bias, otherwise damage may occur.

Bias sequence:

1. Set Vgs voltage to -4.5 V (pinched-off)  
2. Set Vds voltage to required value (28 V)  
3. Set Vgs to give Ids = 56 mA (~-2.4 V) with no RF applied

Schematic Diagram

Figure 42 - MGX-445040-S5EV Schematic

© 2026 cmlmicro.com  
Page 14  
D/445040/1  
October 2026

---

## Bill of Materials
Table 2 - Bill of Materials

| Reference Designator | Value | Size | Description |
|---|---|---|---|
| C1, C4 | 10 nF | 0402 | X7R, 50V, ±10 % |
| C9, C12 | 1 µF | 0603 | X7R, 50V, ±10 % |
| C17, C19 | 10 µF | 1206 | X7R, 50V, ±10 % |
| R1, R4 | 4.7 Ω | 0603 | 0.1 W, ±1 % |
| R9 | 0Ω | 0402 | 0.063W, ±1 % |
| U1 | MGX-445040-S5 |  |  |
| J1, J2 | Mueller Electric Co, RF Connector, SMA edge mount, BU-1420701841 |  |  |
| J3 | Samtec, SMD, 0.1”, 16-way header, IPL1-108-02-L-D-K |  |  |
| C2, C5, C6, C7, C8, C10, C11, C13, C14, C15, C16, C18, C20, C21, C22, C23, C24, R2, R3, R5, R6, R7, R8, J4 | DNF | - | Do not fit component |

Notes
- DNF = Do not fit component

## PCB Layout
Careful layout of the printed circuit board (PCB) is essential for optimum RF and thermal performance. The recommended layout, including ground via pattern underneath the device, may be taken from the evaluation board (Part Number MGX-445040-S5EV).

The PCB is a multi-layer PCB, with ENIG metal finish and all SMT components mounted on the top side. For optimal performance all RF PCB structures are referenced layer 1 to 2 with Rogers RO4350B core, 10 thou thickness with 0.5 oz copper. The inner layer is standard FR4 core for rigidity (Figure 43). The PCB is then mounted to an aluminium carrier, 6 mm thick, to provided thermal dissipation. The MGX-445040-S5EV (PCB0682A - Figure 44), is 38 mm x 54 mm.

Figure 43 - MGX-445040-S5EV (PCB0682A) Layer Stack

Figure 44 - MGX-445040-S5EV PCB Top Layer View

## Thermal Design
The primary RF/DC ground and thermal path is via the exposed ground pad on the backside of the package, which must be connected to the PCB ground plane. An array of plated through-hole vias directly underneath the die pad area is essential to conduct heat away and minimise ground inductance. MGX-445040-S5EV has 72 x 0.2 mm, resin filled grounding vias connecting the top layer all other layers in the ground central pad area.

Figure 45 - MGX-445040-S5EV Ground Vias

The device junction temperature (Tj) can be calculated using Tj = Tc + (Pdiss x Rjc) where Pdiss = Pdc + Pin – Pout and Tc is the case temperature on the backside of the package (central ground pad) in contact with the PCB.

The four mounting holes in the MGX-445040-S5EV near U1 (blue circles in Figure 44) should be used to mount the PCB on to the aluminium carrier using M2 screws. The MGX-445040-S5EV PCB plus carrier can then be mounted to a larger heatsink using the four mounting holes in the corners of the board using M3 screws.

© 2026 cmlmicro.com  
Page 16  
D/445040/1  
October 2026

---

## Package Outline
32-lead 5 x 5 mm AQFN Package (S5)

Figure 46 - Package Outline

## Package Marking
Pin 1 indicator (dot) and 3 rows of text for device identification.

MGX  
445040  
XXXX

Line 1: Product Range Identifier  
Line 2: 6-character part code  
Line 3: Batch code

© 2026 cmlmicro.com  
Page 17  
D/445040/1  
October 2026

---

## Revision History
| Issue | Description | Date |
|---:|---|---|
| 1 | First public release | October 2026 |

## ROHS Compliance
CML Micro certifies, to the best of our knowledge, that its products comply with RoHS directive (2011/65/EU), as amended by Directive (EU) 2015/863.

## REACH Compliance
CML Micro certifies, to the best of our knowledge, that its products do not contain any of the banned substances specified in the SVHC list at https://echa.europa.eu/candidate-list-table. CML Micro are committed to ensuring the safety of products and the compliance with regulations. Publications will be updated in the event that REACH control is compromised.

© 2026 cmlmicro.com  
Page 18  
D/445040/1  
October 2026

---

## Contact Information
For further information please contact your local CML sales representative.  
Contact details can be found at www.cmlmicro.com

Important notice: The information provided in this document is believed to be accurate and reliable however, CML assumes no responsibility for any errors or omissions in this document. CML reserves the right to make changes to this document at any time without notice.

The product(s) referenced within this document are not designed, authorized, or warranted for use in life support, life-critical, surgical or nuclear applications, nor in any application where the failure of the product could create a situation where personal injury or death may occur. Customers using or selling the product for such applications do so entirely at their own risk and without any recourse to CML, financial or otherwise.

CML assumes no liability for applications assistance or the design of customers’ products. Customers are solely responsible f or the design, validation, and testing of customer products as well as compliance with all legal, regulatory, and safety-related requirements concerning their applications.

ALL SPECIFICATIONS AND DATA ARE PROVIDED "AS IS" AND WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. PRODUCTS ARE PROVIDED UNDER THE TERMS OF CML’S CONDITIONS OF SALE.

Nothing in this document or any purchase of CML products shall be construed as granting any license, whether express or implied, under any patent, copyright, trade secret, or other intellectual property right owned or controlled by CML.

© 2026 cmlmicro.com  
Page 19  
D/445040/1  
October 2026