## 2025 TERMINAL INSULATOR ELECTRO-MECHANICAL CATALOGUE

**J2120 (2009 EDITION)**

Underwriters Laboratories  
www.vte.nl

---

### 01 & SAFETY COMPLIANCE

Welcome to VTE Europe your home for high quality Terminal Insulators and Electro-Mechanical components. As a proud manufacturer for over 40 years, we have the experience and the know how to meet the requirements for your project.

Three very simple, yet extremely important reasons why you should integrate the VTE range of Terminal Insulators into your products:

1. Industry standards state that each non grounded terminal or stud that is continuously energised must have a boot, cap, cover or shield that prevents accidental short-circuiting at the terminals or studs.
2. Our Terminal Insulators are a safe and cost effective way to adhere to these standards.
3. With our products being designed and man u fact u red to t he h ighes t standards, satisfaction is guaranteed.

We received **ISO 9001:2015** Certification from the American Center for Sustainable Certifications on Nov 6, 2024.

With over **2,000 product lines** available as a factory option, there is bound to be a product suitable for your application.

#### Code Features Available
- **N** – Normal
- **E** – Extended Length (200 Series Only)
- **L** – Left Handed Cable Entries Only
- **R** – Right Handed Cable Entries Only
- **D** – Dual Cable Entries Only

#### ORDERING GUIDE
**SAMPLE 8 DIGIT PART NUMBER**  
`2 3 4 N 4 V 0 2`

**Series Number** | **Features** | **Material** | **Cable Entry** | **Colour**  
(Shown in sample as “2 3 4 N 4 V 0 2”)

#### Code Materials Available
- **V** – Vinyl - (Standard, Self Extinguishing)
- **F** – Vinyl - (Fire Retardant Material, Non Flammable)
- **E** – TPV - (Thermoplastic Vulcanizate)*
- **R** – TPR - (Trexprene Thermoplastic Rubber)
- **T** – TPR - (Sentoprene Thermoplastic Rubber)

\*High chemical and UV resistance

#### Properties (as shown)
| Code | Flame Class | Brittleness Temp °C | Service Temp °C | Tensile Strenth PSI | Elongation % | Tear Strength PPI |
|---|---|---:|---:|---:|---:|---:|
| V | V-2 |  -48 | 105 | 1550 | 230 |  |
| F | V-0 | -30 | 105 | 1500 | 350 |  |
| E | HB | -60 | 180 | 972 | 139 |  |
| R | HB | ? | ? |  ? | ? | ? |
| T | HB | < -60 | 125 | 1020 | 131 |  |

#### Code Colours Available
- **00** – Clear
- **02** – Red
- **04** – Orange
- **05** – Yellow
- **07** – Dark Green
- **09** – Blue
- **13** – Grey
- **14** – Black

**CAGE Code -** Defence Compliant

---

### INTRODUCTION

OUR PVC’S ARE UL LISTED: **V0 & V02**. MOST OF OUR MATERIALS ARE ROHS & REACH COMPLIANT

J2120 (2009 EDITION)

Underwriters Laboratories -

---

## ELECTRO-MECHANICAL CONTENTS

### 02 Terminal Insulators
- **200 Series Terminal Insulators** (212 Series to 234 Series)  
  Page 03
- **Finding the correct insulator**  
  Page 04
- **Lug & Ring Terminal Insulators** (Gauging Template for 690 & 960 Series, Sizing Chart for 690 & 960 Series)  
  Page 05
- **258 Series to 488 Series**  
  Page 07
- **490 Series to 960 Series**  
  Page 08
- **Lug & Ring** (overall section pages)  
  Page 06
- **Battery Terminal Insulators** (409 Series to 458 Series, 500 Series to 468 Series, 730 series to 976 Series)  
  Page 09
- **L-Post Terminal Insulators** (433 Series to 799 Series)  
  Page 12
- **Specialty Terminal Insulators** (310 Series to 479 Series, 550 Series to 735 Series, 795 Series to 956 Series)  
  Page 13
- **Adapter Terminal Insulators** (419 Series to 457 Series, 451 Series to 484 Series)  
  Page 16
- **Introduction to Electro-Mechanical**  
  Page 18
- **Power Posts** / **Power Bushings & Terminal Busbars** / **Fuse Holders** / ranges (Metric and Imperial)  
  Page 19-21, 22-25, 26, 27-30, 31-32, 33-35, 36-38

---

## 200 Series - Finding the correct insulator

### TERMINAL INSULATORS (Stud-type terminal posts)

For use with stud-type terminal posts

- **N** = Standard Terminal Length
- **E** = Extra Terminal Length

#### Cable Entry Options (as shown)
1. **Cable Entry 1**
   - 5.84mm
   - 3.30mm
   - Cable Gauges 18 - 10  
     0.8mm² [3.24mm] to 5mm² [5.42mm]
2. **Cable Entry 2**
   - 12.7mm
   - 7.62mm
   - Cable Gauges 8 - 2  
     8mm² [6.98mm] to 32mm² [11.93mm]
3. **Cable Entry 3**
   - 17.78mm
   - 12.70mm
   - Cable Gauges 2 - 2/0  
     32mm² [11.93mm] to 62mm² [16.0mm]
4. **Cable Entry 4**
   - 22.86mm
   - 17.78mm
   - Cable Gauges 3/0 - 4/0  
     81mm² [18.3mm] to 103mm² [19.8mm]

#### FINDING THE CORRECT INSULATOR
1. Determine your terminal’s outside diameter (A)
2. Determine your terminal’s post height (B)
3. Determine your terminal’s cable entry (D)

Match your terminal’s measurements against the dimensions table to find the correct insulator for your application.

* Images are for illustration purposes only.

#### 200 SERIES DIMENSIONS TABLE (as shown)
| Base Part Number | A Terminal O.D. (mm) | B Post Height (mm) | C Ins. Grip Diameter (mm) | D Cable Entry Options | E Terminal Length (mm) | Nominal Material Thickness (mm) |
|---|---:|---:|---:|---|---:|---:|
| 212N | 12 | 17.8 | 12.7 | 1, 2 | 25.4 | 1.5 |
| 212E | 12 | 17.8 | 12.7 | 1, 2 | 31.8 | 1.5 |
| 214N | 14 | 19.1 | 12.7 | 1, 2 | 25.4 | 1.5 |
| 214E | 14 | 19.1 | 12.7 | 1, 2 | 31.8 | 1.5 |
| 216N | 16 | 20.3 | 12.7 | 1, 2 | 25.4 | 1.5 |
| 216E | 16 | 20.3 | 12.7 | 1, 2 | 31.8 | 1.5 |
| 218N | 18 | 22.1 | 12.7 | 1, 2 | 25.4 | 1.5 |
| 218E | 18 | 22.1 | 12.7 | 1, 2 | 31.8 | 1.5 |
| 220N | 20 | 24.1 | 17.8 | 1, 2, 3 | 33.5 | 1.8 |
| 220E | 20 | 24.1 | 17.8 | 1, 2, 3 | 44.5 | 1.8 |
| 222N | 22 | 26.7 | 17.8 | 1, 2, 3 | 41.2 | 2.0 |
| 222E | 22 | 26.7 | 17.8 | 1, 2, 3 | 52.3 | 2.0 |
| 224N | 24 | 28.7 | 17.8 | 1, 2, 3 | 41.2 | 2.0 |
| 224E | 24 | 28.7 | 17.8 | 1, 2, 3 | 52.3 | 2.0 |
| 226N | 26 | 31.8 | 19.1 | 1, 2, 3 | 44.5 | 2.3 |
| 226E | 26 | 31.8 | 19.1 | 1, 2, 3 | 57.2 | 2.3 |
| 228N | 28 | 33.5 | 19.1 | 1, 2, 3 | 44.5 | 2.5 |
| 228E | 28 | 33.5 | 19.1 | 1, 2, 3 | 60.5 | 2.5 |
| 230N | 30 | 35.6 | 22.9 | 1, 2, 3, 4 | 50.8 | 2.5 |
| 230E | 30 | 35.6 | 22.9 | 1, 2, 3, 4 | 66.8 | 2.5 |
| 232N | 32 | 38.1 | 22.9 | 1, 2, 3, 4 | 44.5 | 2.5 |
| 232E | 32 | 38.1 | 22.9 | 1, 2, 3, 4 | 60.5 | 2.5 |
| 234N | 34 | 40.6 | 22.9 | 1, 2, 3, 4 | 50.8 | 2.5 |
| 234E | 34 | 40.6 | 22.9 | 1, 2, 3, 4 | 66.8 | 2.5 |

www.vte.nl | 200 Series Terminal Insulators

---

### TERMINAL INSULATORS (200 Series Overview)

Our Terminal Insulators protect live power connections from accidental shorts. Several standards require that continuously charged connections must be protected from accidental shorts, which our product range fulls.

Our insulators are available in multiple colours, materials and sizes.#

The 200 Series Terminal Insulators are designed to protect ring and lug terminals.

They are available in sizes from 12mm up to 34mm diameter and are manufactured from PVC, which has a 105°C temperature rating.

Optional features include extended length for longer terminals and can be manufactured in 5 colours.

While the 200 Series line is commonly used on inverters, starters, windlasses, chargers and other high energy connections, it also works for many applications and helps your products comply with industry safety standards.

The 200 Series Terminal Insulators work with stud and eyelet terminals.

This Series can be ordered with an extended (E) length for longer terminals.

#### TERMINAL INSULATORS 200 SERIES (Series overview as shown)
- **212 Series**: Terminal O.D.* 12mm; 18 - 2 gauge Cable  
- **214 Series**: Terminal O.D.* 14mm; 18 - 2 gauge Cable  
- **216 Series**: Terminal O.D.* 16mm; 18 - 2 gauge Cable  
- **218 Series**: Terminal O.D.* 18mm; 18 - 2 gauge Cable  
- **220 Series**: Terminal O.D.* 20mm; 18 - 2/0 gauge Cable  
- **222 Series**: Terminal O.D.* 22mm; 18 - 2/0 gauge Cable  
- **224 Series**: Terminal O.D.* 24mm; 18 - 2/0 gauge Cable  
- **226 Series**: Terminal O.D.* 26mm; 18 - 2/0 gauge Cable  
- **228 Series**: Terminal O.D.* 28mm; 18 - 2/0 gauge Cable  
- **230 Series**: Terminal O.D.* 30mm; 18 - 2/0 gauge Cable  
- **232 Series**: Terminal O.D.* 32mm; 18 - 4/0 gauge Cable  
- **234 Series**: Terminal O.D.* 34mm; 18 - 4/0 gauge Cable  

\*MoQ’s May Apply

---

### 90 Degree Terminals (Lug & Ring)

Insulators for Right Angle (90 Degree) Terminals

Fits 8ga (8mm²) up to 4/0 (103mm²) terminals/cables

Available in 2 Materials:
- V Material (UL-V2)
- F Material (UL-V0)

Protect right angle terminals in confined spaces

---

## Lug & Ring Terminal Insulators

### GAUGING TEMPLATE FOR 690 & 960 SERIES

(Template shown)

---

### MEDIUM DUTY LUG & RING TERMINAL INSULATORS  
#### SIZING CHART FOR 690 & 960 SERIES

#### 690 Series
| Part Number | Cable Opening | Terminal Width | Terminal Length | Rated Size | Colour |
|---|---:|---:|---:|---|---|
| 691N9V02 | 7.87mm | 19.69mm | 28.7mm | 8 - 19mm² | Red |
| 691N9V14 | 7.87mm | 19.69mm | 28.7mm | 8 - 19mm² | Black |
| 692N9V02 | 12.34mm | 19.56mm | 27.38mm | 32 - 40mm² | Red |
| 692N9V14 | 12.34mm | 19.56mm | 27.38mm | 32 - 40mm² | Black |
| 693N9V02 | 13.72mm | 20.83mm | 28.83mm | 50mm² | Red |
| 693N9V14 | 13.72mm | 20.83mm | 28.83mm | 50mm² | Black |
| 694N9V02 | 14.73mm | 21.34mm | 30.23mm | 60mm² | Red |
| 694N9V14 | 14.73mm | 21.34mm | 30.23mm | 60mm² | Black |
| 695N9V02 | 16.41mm | 23.37mm | 31.95mm | 81mm² | Red |
| 695N9V14 | 16.41mm | 23.37mm | 31.95mm | 81mm² | Black |
| 696N9V02 | 17.78mm | 25.91mm | 30.99mm | 103mm² | Red |
| 696N9V14 | 17.78mm | 25.91mm | 30.99mm | 103mm² | Black |

#### 960 Series
| Part Number | Cable Opening | Terminal Width | Terminal Length | Rated Size | Colour |
|---|---:|---:|---:|---|---|
| 962N9V02 | 10.67mm | 19.43mm | 29.97mm | 13mm² | Red |
| 962N9V14 | 10.67mm | 19.43mm | 29.97mm | 13mm² | Black |
| 963N9V02 | 11.94mm | 19.05mm | 29.97mm | 19mm² | Red |
| 963N9V14 | 11.94mm | 19.05mm | 29.97mm | 19mm² | Black |
| 964N9V02 | 16.92mm | 20.62mm | 34.16mm | 32 - 40mm² | Red |
| 964N9V14 | 16.92mm | 20.62mm | 34.16mm | 32 - 40mm² | Black |
| 965N9V02 | 18.34mm | 22.91mm | 34.62mm | 50mm² | Red |
| 965N9V14 | 18.34mm | 22.91mm | 34.62mm | 50mm² | Black |
| 966N9V02 | 17.93mm | 24.51mm | 38.18mm | 60mm² | Red |
| 966N9V14 | 17.93mm | 24.51mm | 38.18mm | 60mm² | Black |
| 967N9V02 | 22.17mm | 27.53mm | 38.18mm | 81mm² | Red |
| 967N9V14 | 22.17mm | 27.53mm | 38.23mm | 81mm² | Black |
| 968N9V02 | 22.17mm | 29.97mm | 40.51mm | 103mm² | Red |
| 968N9V14 | 22.17mm | 29.97mm | 40.51mm | 103mm² | Black |

---

### Lug & Ring (Additional Series)

A more comprehensive line of Insulators offering a wider variety of Lug and Ring protection. Our Lug & Ring Insulators can be used with starters, generators, alternators, solenoids and other devices. These insulators are available in different sizes, shapes , materials and colours, providing specic solutions to your exact needs.

#### 258 Series
- Terminal Outside Diameter: 58.7mm [2.3"]
- Max Post Height: 50.8mm [2.0"]
- Accepts multiple cables, up to 1/0 ga each.

| 258 Series Part No. | Cable Entry Size |
|---|---|
| 258N4 | Round, 3/0 - 4/0 |
| 258N9 | Oval, up to 4/0 |

#### 216T Series
- Terminal Outside Diameter: 16.3mm [0.64"]
- Maximum Post Height: 18.8mm [0.74"]

| 216T Series Part No. | Cable Entry Size |
|---|---:|
| 216T8 | 6.9mm [.27%] |

#### 400 Series
- Terminal Outside Diameter: 15.2mm [0.6"]
- Maximum Post Height: 22.4mm [0.88"]

| 400 Series Part No. | Cable Entry Size |
|---|---:|
| 400N7 | 7.9mm [.31"] |
| 400N9 | 11.2mm [.44"] |
| 400E4 | 4.6mm [.18"] |

#### 405 & 406 Series
- Terminal Outside Diameter: 25.4mm [1.0"]
- Maximum Post Height: 24.8mm [0.98"]

| 405 / 406 Series Part No. | Cable Entry Size |
|---|---:|
| 405N1 | 3.3mm [.13"] |
| 405N2 | 7.6mm [.30"] |
| 405N9 | 12.7mm [.50"] |
| 406N3 | 4.1mm [.16"] |
| 406N9 | 19.0mm [.75"] |

#### 407 Series
- Terminal Outside Diameter: 17.53mm [0.69"]
- Maximum Post Height: 25.8mm [1.01"]

| 407 Series Part No. | Cable Entry Size |
|---|---:|
| 407N6 | 12.7mm [.50"] |
| 407N8 | 15.7mm [.62"] |

#### 470 Series
- Terminal Outside Diameter: 21.6mm [0.85"]
- Maximum Post Height: 26.9mm [1.06"]

| 470 Series Part No. | Cable Entry Size |
|---|---:|
| 470N9 | 15.9mm [.63"] |

#### 485 Series
- Terminal Outside Diameter: 12.9mm [0.52"]
- Maximum Post Height: 11.4mm [0.45"]

| 485 Series Part No. | Cable Entry Size |
|---|---:|
| 485N9 | 6.4mm [.25"] |

#### 487 & 488 Series
- Terminal Outside Diameter: 32mm [1.26"]
- Maximum Post Height: 24.9mm [0.98"]

| 487 / 488 Series Part No. | Cable Entry Size |
|---|---:|
| 487N6 | 12.7mm [.5"] |
| 487N7 | 15.2mm [.6"] |
| 487N8 | 16.5mm [.65"] |
| 487N9 | 19.0mm [.75"] |
| 488N9 | 22.1mm [.87"] |

---

### Additional Lug & Ring Series (490 to 960)

#### 490 Series
- Designed for use with angled terminal connections.
- Terminal Outside Diameter: 19.1mm [0.75"]
- Maximum Post Height: 27.2mm [1.07"]

| 490 Series Part No. | Cable Entry Size |
|---|---:|
| 490N9 | 12.7mm [.5"] |

#### 510 Series
- Useful for protecting solenoid type connections.
- Terminal Outside Diameter: 12.7mm [0.5"]
- Maximum Post Height: 20.3mm [0.8"]

| 510 Series Part No. | Cable Entry Size |
|---|---:|
| 510N9 | 6.4mm [.25"] |

#### 600 Series
- Large insulator cap allowing for several connections.
- Available in 7 different cable entries and accepts up to 4/0 awg cables.
- Terminal Outside Diameter: 40mm [1.57"]
- Maximum Post Height: 41.1mm [1.62"]

| 600 Series Part No. | Cable Entry Size |
|---|---:|
| 600N1 | (1) 7.9mm [.31"] |
| 600N2 | (2) 7.9mm [.31"] |
| 600N3 | (1) 12.7mm [.5"] |
| 600N4 | (2) 12.7mm [.5"] |
| 600N5 | (1) 15.8mm [.62"] |
| 600N6 | (2) 15.8mm [.62"] |
| 600N7 | Oval up to 4/0 ga |

#### 620 Series
- Finger pull tab on cap for easy removal.
- Terminal Outside Diameter: 19.1mm [0.75"]
- Maximum Post Height: 16.8mm [0.66"]

| 620 Series Part No. | Cable Entry Size |
|---|---:|
| 620N4 | 3.3mm [.13"] |

#### 690 Series
- Suited for medium duty right angle terminals and protects terminals located in confined spaces.
- Accepts 8ga to 4/0ga terminals (8 - 103mm²)

| 690 Series Part No. | Cable Entry |
|---|---:|
| 691N9 | 3.9mm |
| 692N9 | 6.2mm |
| 693N9 | 6.9mm |
| 694N9 | 7.4mm |
| 695N9 | 8.2mm |
| 696N9 | 8.9mm |

(also shown as “19.7 x 28.7mm” etc.)

#### 800 Series
- Retaining ring inside the cap which holds the terminal base.
- Terminal Outside Diameter: 18.5mm [0.73"]
- Maximum Post Height: 26.2mm [1.03"]

| 800 Series Part No. | Cable Entry Size |
|---|---:|
| 800N3 | 4.3mm [.17"] |
| 800N4 | 4.3mm [.17"] |
| 800N5 | 5.3mm [.21"] |
| 800N8 | 7.9mm [.31"] |
| 800N9 | 12.7mm [.50"] |

#### 801 Series
- Suited for single sized cable with an eyelet or ring terminal.
- Terminal Outside Diameter: 19.1mm [0.75"]
- Maximum Post Height: 26.2mm [1.03"]

| 801 Series Part No. | Cable Entry Size |
|---|---:|
| 801N8 | 7.9mm [.31"] |

#### 960 Series
- Heavy duty right angle terminals and protects terminals in confined spaces.
- Accepts 8ga to 4/0ga terminals (8 - 103mm²)

| 960 Series Part No. | Cable Entry |
|---|---:|
| 962N9 | 5.3mm |
| 963N9 | 6.0mm |
| 964N9 | 8.5mm |
| 965N9 | 9.2mm |
| 966N9 | 9.0mm |
| 967N9 | 11.1mm |
| 968N9 | 11.1mm |

(also shown as “19.4 x 30.0mm” etc.)

---

## Battery Terminal Insulators

We manufacture a complete line of Battery Terminal Insulators. These Insulators are designed for use in marine, commercial, industrial and automotive fields.

Our Battery Terminal Insulators offer solutions in single and multiple cables and are available in various materials, sizes and colours #.

### 409 Series
- Protect stamped wrap battery terminals.
- Maximum Post Height: 21.0mm [0.83"]
- Cable Entry: 8 ga - 1/0 ga

| 409 Series Part No. | Cable Entry Size |
|---|---:|
| 409N2 | 7.2mm [.29"] |
| 409N3 | 12.7mm [.50"] |
| 409N9 | 7.6mm [.30"] |

### 415 Series
- Tapered style battery terminals.
- Maximum Post Height: 18.8mm [0.74"]
- Cable Entry: 1/0 ga - 2/0 ga

| 415 Series Part No. | Cable Entry Size |
|---|---:|
| 415N6 | 9.4mm [.37"] |
| 415N7 | 11.2mm [.44"] |
| 415N8 | 12.7mm [.50"] |
| 415N9 | 15.9mm [.62"] |
| 415N0 | 19.1mm [.75"] |

### 416 Series
- Popular solution for battery terminal installation.
- Maximum Post Height: 19.3mm [0.76"]
- Cable Entry: 16.mm [0.63"]

| 416 Series Part No. | Cable Entry Size |
|---|---:|
| 416N9 | 16.0mm [.63"] |

### 417 Series
- Snap on insulator removable without cable.
- Maximum Post Height: 23.1mm [0.91"]
- Cable Entry: 1 - 1/0 ga

| 417 Series Part No. | Cable Entry Size |
|---|---:|
| 417N9 | 12.7mm [.50"] |

### 430 Series
- Tapered style battery posts.
- Maximum Post Height: 21.1mm [0.83"]
- Cable Entry: 2/0, 3/0 ga

| 430 Series Part No. | Cable Entry Size |
|---|---:|
| 430N7 | 14.2mm [.56"] |
| 430N8 | 17.3mm [.68"] |

### 455 Series
- Dual post battery, snaps easily onto cable; can be fastened with a zip-tie.
- Accepts multiple cables of different sizes.

| 455 Series Part No. | Cable Entry Size |
|---|---:|
| 455N4 | 10.0mm [.4"] |
| 455N6 | 12.7mm [.5"] |
| 455N8 | 19.1mm [.75"] |

### 458 Series
- Dual post battery; attached cover can insulate post when not in use.
- Often used with 226 Series Insulator.

| 458 Series Part No. | Cable Entry Size |
|---|---|
| 458N0 | N/A |

\# MoQ’s May Apply

---

### 500 Series
The 500 Series is the popular choice for battery terminal protection.

- Available in left, right and dual entry cable options.
- Cable Entry: Up to 12.7mm [0.5"]

500 Series

(Shown as part list on page:)

- 500L7 | 12.7mm [.50"]
- 500L9 | 17.5mm [.69"]
- 500R7 | 12.7mm [.50"]
- 500R9 | 17.5mm [.69"]
- 500D7 | 12.7mm [.50"]
- 500D9 | 17.5mm [.69"]
- 500B | N/A

### 553 Series
Designed to protect side post battery terminal connections.

Featuring a retaining loop that keeps the insulator with the battery or cable.

| 553 Series Part No. | Cable Entry Size |
|---|---:|
| 553X6 | 15.0mm [.59"] |
| 553X9 | 22.9mm [.90"] |

### 460 Series
- Dual post battery insulator specifically fits Exide Group 32 marine battery.
- Tabbed finger grip for easy removal.
- Allows for a secondary battery connection.

| 460 Series Part No. | Cable Entry Size |
|---|---:|
| 460N9 | N/A |
| (shown: 460N9 N/A) |

### 462 & 463 Series
- Protect dual post battery terminals used in marine industry.
- Terminal connection centre to centre: 43.69mm
- Attached caps cover post when not in use.

| 462 / 463 Series Part No. | Entry Size |
|---|---|
| 462N0 | N/A |
| 463N0 | N/A |

### 466 Series
- Protect large heavy duty battery terminals.
- Available in left, right and dual cable entries.

466 Series (part list shown)
- 466L1, R1, L2, R2, L3, R3, N9 (values shown)

| 466L/R Part No. | Cable Entry Size |
|---|---:|
| 466L1, R1 | 3.3mm [.13"] |
| 466L2, R2 | 7.6mm [.30"] |
| 466L3, R3 | 12.7mm [.50"] |
| 466N9 | Oval up to 4/0 ga |

### 468 Series
- Protect large heavy duty battery terminals.
- Snap onto terminal and cable for easy access.
- Available in left, right and dual cable entries.

| 468 Series Part No. | Cable Entry Size |
|---|---:|
| 468L9 | 20.8mm [.82"] |
| 468R9 | 20.8mm [.82"] |
| 468D9 | 20.8mm [.82"] |

---

### 730 / 731 Series
- Suited to protect large wing nut type terminal connections.
- Top swivels to accommodate cables from various directions.
- Top insulator offers single, dual and multiple cable entries.

| 730 / 731 Series Part No. | Cable Entry Size |
|---|---:|
| 730N1 | (1) 7.9mm [.31"] |
| 730N2 | (2) 7.9mm [.31"] |
| 730N3 | (1) 12.7mm [.5"] |
| 730N4 | (2) 12.7mm [.5"] |
| 730N5 | (1) 15.8mm [.62"] |
| 730N6 | (2) 15.8mm [.62"] |
| 730N7 | Oval up to 4/0 ga |

731 series (part list shown similarly)
- 731N1, 731N2, 731N3, 731N4, 731N5, 731N6, 731N7 (Red)

---

### 843 Series
- Protect a tapered battery post.
- Available in left and right cable entry.
- Maximum Post Height: 20.1mm [0.79"]

| 843 Series Part No. | Cable Entry Size |
|---|---:|
| 843L8 | 11.2mm [.44"] |
| 843L9 | 12.7mm [.50"] |
| 843R8 | 11.2mm [.44"] |
| 843R9 | 12.7mm [.50"] |

### 900 Series
- Cover cast-on lead terminals.
- Available in left, right and dual cable entry.
- Cable entry can be cut and zip-tied for up to 4/0 awg.

| 900 Series Part No. | Cable Entry Size |
|---|---:|
| 900L9 | 16.0mm [.63"] |
| 900R9 | 16.0mm [.63"] |
| 900D9 | 16.0mm [.63"] |

### 974 Series
- Protects large battery terminal connections.
- Maximum Post Height: 29.9mm [1.18"]
- Cable Entry: Large -20.3 mm [0.8"] diameter

| 974 Series Part No. | Cable Entry Size |
|---|---:|
| 974N9 | 20.3mm [.80"] |

### 975 Series
- Protect large battery terminal connections.
- Features large cable entry for flag or right angle terminals.
- Cable Entry: Up to 4/0 ga

| 975 Series Part No. | Cable Entry Size |
|---|---:|
| 975D8 | 20.3mm [.80"] |

### 976 Series
- Protect large battery terminal connections.
- Triple cable entry allows for 3 cable connections.
- Cable Entry: Up to 4/0 ga

| 976 Series Part No. | Cable Entry Size |
|---|---:|
| 976N8 | 20.3mm [.80"] |

---

## L-Post Terminal Insulators

L-Post Terminal Insulators protect Flag terminals and L-Post terminals from accidental shorts and adverse weather. Protect your connections, comply with industry safety standards, and improve the look of your cabling, wiring and terminal connections.

### 433 Series
- Large insulator suited to protect large L-Post terminal connections.
- Available with left and right entry.
- Maximum Post Height: 26.4mm [1.04"]

| 433 Series Part No. | Cable Entry Size |
|---|---:|
| 433L5 | 11.2mm [.44"] |
| 433R5 | 11.2mm [.44"] |

### 436 Series
- Protect flat threaded or low profile posts.
- Snaps onto the cable; can be secured with a zip-tie.
- Maximum Post Height: 19.1mm [0.75"]

| 436 Series Part No. | Cable Entry Size |
|---|---:|
| 436N4 | 9.2mm [.36"] |
| 436N5 | 12.2mm [.48"] |
| 436N7 | 16.2mm [.64"] |
| 436S4 | 9.0mm [.35"] |
| 436S5 | 12.2mm [.48"] |

### 437 Series
- Similar to 436 but suited a greater terminal height.
- Snaps onto cable and can be secured with a zip-tie.
- Maximum Post Height: 32.5mm [1.28"]

| 437 Series Part No. | Cable Entry Size |
|---|---:|
| 437N4 | 9.3mm [.36"] |
| 437N5 | 11.4mm [.46"] |
| 437N7 | 12.3mm [.48"] |
| 437S5 | 10.0mm [.40"] |

### 439 Series
- Large design allowing the fitting of various terminals.
- Snaps onto the cable; can be secured with a zip-tie.
- Maximum Post Height: 32.5mm [1.28"]

| 439 Series Part No. | Cable Entry Size |
|---|---:|
| 439N5 | 9.6mm [.38"] |

### 444 Series
- Protects smaller L-Post and Flag battery connections.
- Available in left or right entry cable.
- Maximum Post Height: 30.5mm [1.2"]

| 444 Series Part No. | Cable Entry Size |
|---|---:|
| 444L6 | 7.6mm [.30"] |
| 444R6 | 7.6mm [.30"] |
| 444L8 | 9.4mm [.37"] |
| 444R8 | 9.4mm [.37"] |
| 444L9 | 11.2mm [.44"] |
| 444R9 | 11.2mm [.44"] |

### 799 Series
- Suited to protect L-Post and Flag battery connections.
- Snaps onto the cable; can be secured with a zip-tie.
- Maximum Post Height: 38.3mm [1.51"]

| 799 Series Part No. | Cable Entry Size |
|---|---:|
| 799L9 | 6.4mm [.25"] |
| 799R9 | 6.4mm [.25"] |
| 799D9 | 6.4mm [.25"] |

---

## Specialty Terminal Insulators

We manufacture a large range of Specialty Insulators, to fit many unusual applications. We offer insulators for power connectors, circuit breakers, cable entry points and many other solutions. Many solutions are engineered from customer inquiries, filling any void in the industry.

### 310 Series
- Protective disk for various uses in our insulators.
- Available in 2 entry hole sizes or without entry hole.
- For use with 778 Series Post, 480 Series and 476 Series

| 310 Series Part No. | Cable Entry Size |
|---|---:|
| 310N4 | 6.4mm [.25"] |
| 310N6 | 7.1mm [.28"] |
| 310N7 | 9.7mm [.38"] |
| 310N8 | 10.2mm [.40"] |
| 310N9 | 12.7mm [.50"] |

### 311 Series
- Protective disk for various uses in our insulators.
- Protects cables from sharp edges.
- Fits hole Diameter: 25.4mm [1.0"]
- Maximum Panel Thickness: 1.5mm [0.06"]

| 311 Series Part No. | Cable Entry Size |
|---|---:|
| 311N9 | 20.3mm [.80"] |

### 321 Series
- Commonly used with our Auxiliary Power Connector
- Insulator cover has retaining ring
- Cap has retainer entry width of 30.48mm

| 321 Series Part No. | Cable Entry Size |
|---|---:|
| 321N9 | 34.8mm [1.37"] |

### 375 Series
- Protective covers for 7753N7 - 3 Point High Amp Busbar
- Cable entry allows 2/0, up to 4/0 ga cable
- Insulator snaps onto cable

| 375T5 Series Part No. | Cable Entry Size |
|---|---:|
| 375T5 | 15.2mm x 30.5mm |

### 464 Series
- Protective covers for small circuit breakers
- Removable side entries to customise application
- Top cover presses down onto circuit breaker posts
- Made from fire retardant PVC

| 464 Series Part No. | Cable Entry Size |
|---|---:|
| 464N0 | 6.2mm [.24"] |

### 479 Series
- Protective disk for various uses in our insulators
- Available in 2 entry hole sizes or without entry hole
- For use with 778 Series Post, 480 Series and 476 Series

| 479 Series Part No. | Cable Entry Size |
|---|---:|
| 479A9 | 16.0mm [.63"] |
| 479B9 | 19.6mm [.77"] |
| 479N9 | N/A |

### 550 Series
- Protects engine senors
- Generous height and downward wire exit
- Retainer lip keeps insulator in place
- Wall Thickness: 1.0mm [0.03"]

| 550 Series Part No. | Cable Entry Size |
|---|---:|
| 550N6 | 6.4mm [.25"] |
| 550N9 | 9.5mm [.38"] |

### 560 Series
- Protects engine senors
- Generous height and downward wire exit
- Retainer lip keeps insulator in place
- Wall Thickness: 2.8mm [0.11"]

| 560 Series Part No. | Cable Entry Size |
|---|---:|
| 560N4 | 6.4mm [.25"] |

### 621 Series
- Small straight sensor cover
- Moulded in ring provides greater strength
- Typically used with oil & water temperature sensors
- Material options allow the 621 to be used in high temperature environment

| 621 Series Part No. | Cable Entry Size |
|---|---:|
| 621N9 | 6.4mm [.25"] |

### 725 Series
- Tunnel cap allows for various cable entry sizes and shapes
- Maximum Terminal O.D: 24mm [0.94"]
- Maximum Terminal Height: 25.3mm [0.99"]

| 725 Series Part No. | Cable Entry Size |
|---|---|
| 224T9 | Various Inserts |

### 729 Series
- Tunnel cap allows for various cable entry sizes and shapes
- Maximum Terminal O.D: 28mm [1.10"]
- Maximum Terminal Height: 30.7mm [1.20"]

| 729 Series Part No. | Cable Entry Size |
|---|---|
| 228T9 | Various Inserts |

### 735 Series
- Tunnel cap allows for various cable entry sizes and shapes
- Maximum Terminal O.D: 34mm [1.52"]
- Maximum Terminal Height: 38.6mm [1.30"]

| 735 Series Part No. | Cable Entry Size |
|---|---|
| 234T9 | Various Inserts |

Ref to Website Chart for Sizes & Functionality

### 795 Series
- Works great with the 770 and 771 Series Power Posts
- Single Entry Diameter: 17.8mm [0.7"]

| 795 Series Part No. | Cable Entry Size |
|---|---:|
| 795 | 17.8mm [.7"] |

### 830 Series
- Cover for 50 Amp Anderson or SMH 2 Pole battery
- Loop end retains insulator to cable
- Made from fire-redardant PVC

| 830 Series Part No. | Cable Entry Size |
|---|---|
| 830N0 | N/A |

### 831 Series
- Cover for 175 Amp Anderson or SMH 2 Pole battery
- Loop end retains insulator to cable
- Made from fire-redardant PVC

| 831 Series Part No. | Cable Entry Size |
|---|---|
| 831N0 | N/A |

### 832 Series
- Cover for 350 Amp Anderson or SMH 2 Pole battery
- Loop end retains insulator to cable
- Made from fire-redardant PVC

| 832 Series Part No. | Cable Entry Size |
|---|---|
| 832N0 | N/A |

### 840 Series
- Small right angle sensor cover, used with oil and water temperature sensors
- Body Opening: 20.6mm [0.81"]
- Cable Entry: 6.4mm [0.25"]

| 840 Series Part No. | Cable Entry Size |
|---|---:|
| 840N9 | 6.4mm [.25"] |

### 956 Series
- Protect connection points or battery array connections
- Top lid allows for easy access to connection point
- Accepts up to 2/0 cables

| 956 Series Part No. | Cable Entry Size |
|---|---:|
| 956D9 | 17.8mm [.7"] |

---

## Adapter Terminal Insulators

Adapter Insulators protect terminals that can detach the cable from the terminal, commonly found in the marine industry. Our terminal insulators help your company comply with various industry safety standards.

### 419 Series
- Protect multiple cable terminals.
- Insulator can slide back and forth to enable access to cable connections.
- Cable Entry: 13.8mm [0.53"]

| 419 Series Part No. | Cable Entry Size |
|---|---:|
| 419N9 | Open up to 1/0 ga |

### 421 Series
- Protect offset battery terminals (negative terminals/black).
- Cable Entry: 15.2mm [0.60"]

| 421 Series Part No. | Cable Entry Size |
|---|---:|
| 421N9 | 15.2mm [.60"] |

### 422 Series
- Protect offset battery terminals (positive terminals/red).
- Cable Entry: 15.2mm [.60"]

| 422 Series Part No. | Cable Entry Size |
|---|---:|
| 422N9 | 15.2mm [.60"] |

### 456 Series
- Marine battery terminal protection.
- Works with bolt-on / wing-nut battery terminals.
- Accepts single or multiple cables.

| 456 Series Part No. | Cable Entry Size |
|---|---|
| 456N9 | Oval up to 4/0 ga |

### 457 Series
- Marine battery terminal protection.
- Works with bolt-on / wing-nut battery terminals.
- Available in 3 sizes

| 457 Series Part No. | Cable Entry Size |
|---|---:|
| 457N1 | 2.8mm [.11"] |
| 457N2 | 8.1mm [.32"] |
| 457N3 | 14.0mm [.55"] |

---

### 451 Series
- Protect multiple cable adapter terminals.
- Insulator snaps onto the cable enabling easy removal.
- Cable Entry: 13.8mm [.53"]

| 451 Series Part No. | Cable Entry Size |
|---|---:|
| 451N9 | Open up to 1/0 ga |

### 453 Series
- Protect offset adapter battery terminals (negative/black).
- Cable Entry: 12.7mm [.50"]

| 453 Series Part No. | Cable Entry Size |
|---|---:|
| 453L9 | Open up to 1/0 ga |
| 453D9 | Open up to 1/0 ga |

### 454 Series
- Protect offset adapter battery terminals (positive/red).
- Cable Entry: 12.7mm [.50"]

| 454 Series Part No. | Cable Entry Size |
|---|---:|
| 454R9 | Open up to 1/0 ga |
| 454D9 | Open up to 1/0 ga |

* ‘D’ Version allows cable to pass through insulator to next connection.

### 776 Series
- Protects heavy duty battery terminals.
- Weatherproof insulator / cover kit.
- Can be used with filling material to make a waterproof solution.
- Includes 479 Series Disc.
  
| 776 Series Part No. | Cable Entry Size |
|---|---:|
| 776N7 | 10.7mm [.42"] |
| 776N8 | 15.8mm [.62"] |
| 776N9 | 20.8mm [.82"] |

### 484 Series
- Protect right angle terminals.
- Available in regular (V) material - Thermoplastic Rubber (T).
- Cable Entry: 4/0 ga + sized cables.

| 484 Series Part No. | Cable Entry Size |
|---|---|
| 484N9 | 4/0 ga + (30mm /1.18") |

* ‘D’ Version allows cable to pass through insulator to next connection.

---

## ELECTRO-MECHANICAL

VTE offers a wide range of Electro-Mechanical devices for making secure connections, protecting components and wiring, distributing power, and extending power connections. These devices fill a void in the market place by providing high quality, low costs solutions.

The Electro-Mechanical range of products are rated for use up to 48 VDC. Other voltage ratings and current specifications are available on technical data sheets for each item on our website.

Our products are engineered with protection in mind, so that our products can be used in conjunction with our Terminal Insulators, to comply with common industry standards.

Where applicable, some of our products contain our Blue-Dot Technology. This technology indicates when a conductive fastener (nut) is utilised in place of a mechanical fastener. These conductive fasteners will carry current in a more efficient fashion and must be kept in their factory installed location.

Failure to keep the conductive fastener in its factory installed location will result in degraded performance.  
Failure to keep the mechanical fastener in its factory installed location can result in premature device failure.

---

## BLUE-DOT TECHNOLOGY

(Blue-dot callout shown)

---

## Metric Range (Electro-Mechanical)

### 19 ELECTRO-MECHANICAL POWER POSTS

#### Single Point Pass Thru Power Post (Metric)
| Part Number | Post | Colour | Max Voltage | Max Amps* |
|---|---|---|---|---:|
| 77208N02 | M8 | Red | 48 VDC | 250 |
| 77208N05 | M8 | Yellow | 48 VDC | 250 |
| 77208N14 | M8 | Black | 48 VDC | 250 |
| 77210N02 | M10 | Red | 48 VDC | 350 |
| 77210N05 | M10 | Yellow | 48 VDC | 350 |
| 77210N14 | M10 | Black | 48 VDC | 350 |

Allows for multiple connections on either side of barrier  
Allows current to be passed through panel  
Corrosion resistant hardware  
Lower cost alternative to power bushing  
Easy Installation using regular drill bits  
Blue-Dot Technology  
Maximum Panel Thickness: 9.53mm  
Maximum Voltage: 48 VDC  
Maximum Amperage: Ref Chart @ 12 VDC  
Base Material: Glass-Filled Nylon  
Post: Ni-Plated Brass  
Inner Nuts (Conductive): Tin-Plated Brass  
Outer Nuts (Fastening): Stainless Steel  
Spring Washers: Stainless Steel  
Flat Washer: Stainless Steel  

Using 956 Series & 226 Series terminal insulators help comply with ABYC, USCG and ISO standards.

#### Single Point Waterproof Pass Thru Power Post (Metric)
* Waterproof to IP67+

| Part Number | Post | Colour | Max Voltage | Max Amps |
|---|---|---|---|---:|
| 77208W02 | M8 | Red | 48 VDC | 250 |
| 77208W05 | M8 | Yellow | 48 VDC | 250 |
| 77208W14 | M8 | Black | 48 VDC | 250 |
| 77210W02 | M10 | Red | 48 VDC | 350 |
| 77210W05 | M10 | Yellow | 48 VDC | 350 |
| 77210W14 | M10 | Black | 48 VDC | 350 |

Pass current through a barrier - Max Thickness 9.53mm  
Corrosion resistant hardware  
Gasket and O-Ring Prevent Water & Dust  
O-Ring Mounting Screws  
Base Material: Glass-Filled Nylon  
Maximum Voltage: 48 VDC  
8mm Maximum Amperage: 250 Amps @ 12 VDC  
10mm Maximum Amperage: 350 Amps @ 12VDC  
Lower cost alternative to power bushing  
To help comply with ABYC, USCG & ISO standards - Use 220N Series (front) & 226N Series (back) insulators  
* In house testing to IP67 specifications

WATER PROOF

---

### 20 POWER POSTS (Metric) - Single Point Power Post - Low Profile

#### Single Point Power Post - Low Profile
| Part Number | Post | Post Amps* | Colour | Base Size |
|---|---|---:|---|---|
| 77306N02 | M6 | 150 | Red | Small |
| 77306N14 | M6 | 150 | Black | Small |
| 77308N02 | M8 | 190 | Red | Small |
| 77308N14 | M8 | 190 | Black | Small |

Lower height than our 770 Series  
Corrosion resistant stainless steel hardware  
Connect two or more voltage lines  
Hook up negative return lines to single cable  
Maximum Voltage: 48 VDC  
Maximum Amperage: 190 Amps @ 12 VDC  

*Amperage ratings are for reference only. Current capacity is determined by the cables used, not the junction post. Current ratings relate to expected cable capacities.

---

#### 770 Series (Metric) - Single Point Power Post - Small Base
| Part Number | Post | Post Amps* | Colour | Base Size |
|---|---|---:|---|---|
| 77008N02 | M8 | 190 | Red | Small |
| 77008N05 | M8 | 190 | Yellow | Small |
| 77008N14 | M8 | 190 | Black | Small |

Single Point Power Post - Small Base  
Dual Small Base Power Post Holder

Dual Post Holder
| Part Number | Description | Colour | Base Size |
|---|---|---|---|
| 72770000 | Dual Post Holder | Black | Small |

Compact system to mount 2 single point power posts  
Raised mounting platform allows moisture to escape  
Safety divider reduces risk of shorts & arcs during install  
Power posts can be unscrewed from holder & replaced  
Holder fastened by 4 machine screws  
Provides option for power posts with dissimilar stud sizes  
Compatible with all 770 & 773 series power posts  
770 & 773 Series Power Posts - Sold Separately  
Release Date: Q4 2026

---

### 21 POWER POSTS (Metric) - Single Point Power Post - Heavy Duty / Large Base

#### Single Point Power Post - Heavy Duty
| Part Number | Post | Post Amps* | Colour | Base Size |
|---|---|---:|---|---|
| 77108N02 | M8 | 190 | Red | Large |
| 77108N14 | M8 | 190 | Black | Large |

All Hardware: Stainless Steel  
Base Material: Glass-Filled Nylon  
Maximum Voltage: 48 VDC  
Maximum Amperage: 160 Amps @ 12 VDC

#### Single Point Power Post - Heavy Duty
| Part Number | Post | Post Amps* | Colour | Base Size |
|---|---|---:|---|---|
| 77510M0N02 | M10 | 240 | Red | H/Duty |
| 77510M0N14 | M10 | 240 | Black | H/Duty |
| 77512M0N02 | M12 | 300 | Red | H/Duty |
| 77512M0N14 | M12 | 300 | Black | H/Duty |

Strong stable base tolerates heavy torque & pulling force  
All Hardware: Stainless Steel  
Base Material: Glass-Filled Nylon  
Maximum Voltage: 48 VDC  
Maximum Amperage: 250 Amps @ 12 VDC  
Connect two or more voltage lines  
Hook up negative return lines to single cable  
Flexible mounting orientation

INSULATION PACKAGES  
Contact us for further details on available insulation packages or please visit our website www.vte.nl

---

### 22 POWER BUSHINGS (Metric)

#### Copper Core Power Bushing
High energy transfer and High torque capabilities  
High Anti-Rotation  
Maximum Panel Thickness: 9.5mm  
Maximum Voltage: 48 VDC  
Bushing Material: Glass-Filled Nylon  
Post Material: Nickel-Plated Steel

Weatherproof part (”W”) includes:  
(1)x 358N Series sealing ring & (1)x 258N9 Series insulator

| Part Number | Post | Amperages | Colour | Weather Proof Kit |
|---|---|---|---|---|
| CCB108N02 | M10 | Norm:600 - Peak:750 | Red | No |
| CCB108N02W | M10 | Norm:600 - Peak:750 | Red | Yes |
| CCB108N05 | M10 | Norm:600 - Peak:750 | Yellow | No |
| CCB108N05W | M10 | Norm:600 - Peak:750 | Yellow | Yes |
| CCB108N14 | M10 | Norm:600 - Peak:750 | Black | No |
| CCB108N14W | M10 | Norm:600 - Peak:750 | Black | Yes |
| CCB126N02 | M12 | Norm:440 - Peak:550 | Red | No |
| CCB126N02W | M12 | Norm:440 - Peak:550 | Red | Yes |
| CCB126N05 | M12 | Norm:440 - Peak:550 | Yellow | No |
| CCB126N05W | M12 | Norm:440 - Peak:550 | Yellow | Yes |
| CCB126N14 | M12 | Norm:440 - Peak:550 | Black | No |
| CCB126N14W | M12 | Norm:440 - Peak:550 | Black | Yes |
| CCB376M0N05 | M10 | Norm:360 - Peak:450 | Yellow | No |
| CCB376M0N05W | M10 | Norm:360 - Peak:450 | Yellow | Yes |
| CCB376M0N07 | M10 | Norm:360 - Peak:450 | Green | No |
| CCB376M0N14 | M10 | Norm:360 - Peak:450 | Black | No |
| CCB376M0N14W | M10 | Norm:360 - Peak:450 | Black | Yes |
| CCB376M0NR02 | M10 | Norm:360 - Peak:450 | Red | No |
| CCB376M0NR02W | M10 | Norm:360 - Peak:450 | Red | Yes |

POWER BUSHINGS  
WEATHER PROOF KIT

Proof Kit
Weather

#### Internal Thread Copper Core Power Bushing
* Waterproof to IP67+

High conductivity with low heat buildup  
Corrosion resistant stainless steel hardware  
Silicone rubber gasket  
Maximum Voltage: 48 VDC  
Bushing Material: Glass-Filled Nylon  
Maximum Panel Thickness: 9.5mm  
Low profile installations  
To help comply with ABYC, USCG & ISO standards - Use 232 Series (pg 04) or 487 Series Insulators (pg 07)
* In house testing to IP67 specifications

**Proof Kit**  
NEW!  
IP67 *

**ICB Chart footnote**:  
**16mm bolt length allows for ring terminal connection capacity from 0mm - 4.5mm. If greater capacity required, please contact us or refer to the relevant ICB chart on our website www.vte.nl**

| Part Number | Post | Post Ring Terminal Capacity** | Colour |
|---|---|---|---|
| ICB086N02 | M8 | (2) 16mm - Min 0 - Max 4.5mm | Red |
| ICB086N05 | M8 | (2) 16mm - Min 0 - Max 4.5mm | Yellow |
| ICB086N07 | M8 | (2) 16mm - Min 0 - Max 4.5mm | Green |
| ICB086N09 | M8 | (2) 16mm - Min 0 - Max 4.5mm | Blue |
| ICB086N13 | M8 | (2) 16mm - Min 0 - Max 4.5mm | Grey |
| ICB086N14 | M8 | (2) 16mm - Min 0 - Max 4.5mm | Black |

(Additional detailed lists for CCB/ICB appear on later pages.)

---

### 24 POWER BUSHINGS (Metric) - Copper Core Flange Bushing

Copper Core Flange Bushing

WEATHER PROOF KIT  
Proof Kit

Weather Part Number | Post | Amperages | Colour
(Shown as part list on the page)

| Part Number | Post | Amperages | Colour |
|---|---|---|---|
| CCFB106N02 | M10 | Norm:360 - Peak:450 | Red |
| CCFB106N02W | M10 | Norm:360 - Peak:450 | Red |
| CCFB106N05 | M10 | Norm:360 - Peak:450 | Yellow |
| CCFB106N05W | M10 | Norm:360 - Peak:450 | Yellow |
| CCFB106N14 | M10 | Norm:360 - Peak:450 | Black |
| CCFB106N14W | M10 | Norm:360 - Peak:450 | Black |
| CCFB108N02 | M10 | Norm:600 - Peak:750 | Red |
| CCFB108N02W | M10 | Norm:600 - Peak:750 | Red |
| CCFB108N05 | M10 | Norm:600 - Peak:750 | Yellow |
| CCFB108N05W | M10 | Norm:600 - Peak:750 | Yellow |
| CCFB108N14 | M10 | Norm:600 - Peak:750 | Black |
| CCFB108N14W | M10 | Norm:600 - Peak:750 | Black |
| CCFB126N02 | M12 | Norm:440 - Peak:550 | Red |
| CCFB126N02W | M12 | Norm:440 - Peak:550 | Red |
| CCFB126N05 | M12 | Norm:440 - Peak:550 | Yellow |
| CCFB126N05W | M12 | Norm:440 - Peak:550 | Yellow |
| CCFB126N14 | M12 | Norm:440 - Peak:550 | Black |
| CCFB126N14W | M12 | Norm:440 - Peak:550 | Black |

High energy transfer and High torque capabilities  
High Anti-Rotation  
Maximum Panel Thickness: 9.53mm  
Maximum Voltage: 48 VDC  
Bushing Material: Glass-Filled Nylon  
Fastener (Nut) Material: Stainless Steel  
Post Material: Nickel-Plated Steel  
Weatherproof part (”W”) includes:  
(1)x reinforced silicone gasket & (1)x 232N3 Series insulator

---

### 25 Copper Core Jumper - kits (Metric)

1x Red Copper Core Jumper Bushing  
1x Black Copper Core Jumper Bushing  
1x Adhesive Decal for installation drilling guide  
1x Protection Divider with Screws (2)

Copper Core Jumper - Flush Mount Kit

| Part Number | Post | Amps | Max Voltage | Colour |
|---|---|---:|---|---|
| CCJB376FMKM | M10 | 350 | 48 VDC | Red & Black |

Copper Core Jumper - Bracket Mount Kit

| Part Number | Post | Amps | Max Voltage | Colour |
|---|---|---:|---|---|
| CCJB376M0N14 | M10 | 350 | 48 VDC | Black |
| CCJB376M0NR02 | M10 | 350 | 48 VDC | Red |

Includes post insulator  
An effective solution to jumpstarting devices and for providing remote charging capabilities. The copper core is cold swaged into a hex shape equipping high energy transfer performance.

All Jumper Bushings are compatible with common ‘Double D’ punches to increase anti-rotation characteristics.

MOUNT KIT INCLUDED

| Part Number | Post | Amps | Max Voltage | Colour |
|---|---|---:|---|---|
| CCJB376BMKM | M10 | 350 | 48 VDC | Red & Black |

---

### 26 TERMINAL BUSBARS (Metric)

Terminal Busbars: 3 Point & 4 Point  
Terminal Busbars: Large 4 Point & Dual 4 Point  
Terminal Busbars: 10 Point & 12 Point  
Terminal Busbar: Tab Type: 10, 20, 30, 40 Points  

Fuse Holders: ANL & High Amp ANL  
Fuse Holders: Mega & T Class  

Power Posts: Single Point Pass Thru & Waterproof Pass Thru  
Power Posts: Single Point - Low Profile, Small Base & Dual Post Holder  
Power Posts: Large Base, Heavy Duty & Eight Point  

Power Bushings: Copper Core  
Power Bushings: Copper Core Flange  
Power Bushings: Copper Core Jumper - Mounting Kits: Flush & Bracket

---

### 27 FUSE HOLDERS (Metric) - ANL Fuse Holder

ANL Fuse Holder

| Part Number | Post | Cover Kit Includes | Colour |
|---|---|---|---|
| ANB740M0N02 | M8 | Fuse Cover & (2) 487N9 Insulators | Red |
| ANB740M0N14 | M8 | Fuse Cover & (2) 487N9 Insulators | Black |
| ANB740M10N02 | M10 | Fuse Cover & (2) 487N9 Insulators | Red |
| ANB740M10N14 | M10 | Fuse Cover & (2) 487N9 Insulators | Black |

ANL Hi- Amp Fuse Holder
| Part Number | Post | Amps | Includes | Colour |
|---|---|---:|---|---|
| ANB753M9N02 | M10 | 750 | 751N9P00 Cover | Red |
| ANB753M9N14 | M10 | 750 | 751N9P00 Cover | Black |

(Other descriptive lines shown below the table on page:)

Secure your ANL fuses with VTE ANL Fuse Holders  
Cost effective solution for 50 - 300 Amp Fusing  
Cable Diameter: 19.1mm (0.75")  
Maximum Holder Voltage: 48 VDC  
Base Material: Glass-Filled Nylon  
Connection Post Material: Stainless Steel  
Lock Washer: Stainless Steel  
Flat Washer: Brass  
Accommodates large & narrow slot ANL Fuses  
Also available in 5/16" Post Size (Pg 31)

COVER KIT INCLUDED  
FUSE HOLDER INCLUDED

---

### 32 FUSE HOLDERS (Imperial) - Mega Fuse Holder / T-Class Fuse Holder

#### Mega Fuse Holder
Cost effective solution to Mega Fuse protection  
Maximum Voltage: 32 VDC  
Holder Post: 5/16” (7.93mm) Stainless Steel  
Flat Washers: Brass  
Connection Fastener Nut: Stainless Steel  
Base Material: Glass-Filled Nylon

When used with 405 Series Terminal Insulators it helps comply with safety regulations  
Accepts 60 - 250 Fuse Amperages

| Part Number | Kit Includes | Cable Diameter | Colour |
|---|---|---:|---|
| MFB736N9N02 | (2) 405N9V02 Insulators | 12.7mm (0.5") | Red |
| MFB736N9N14 | (2) 405N9V14 Insulators | 12.7mm (0.5") | Black |

#### T-Class Fuse Holder
Commonly used for equipment protection  
Holder Voltage Rating: 48 VDC  
3/8” Stud accepts lug/ring terminals up to 4/0 AWG (103mm2)  
Connection Stud: Stainless Steel  
Connection Fastener Nut: Stainless Steel  
Washers: Stainless Steel  
Base Material: Glass-Filled Nylon

Cost effective solution for securing Class T Fuses  
Optional cover helps comply with safety regulations

| Part Number | Post | Maximum Amperage | Colour |
|---|---|---:|---|
| TFB735N0N02 | 3/8" | 400 Amps @ 12 VDC | Red |
| TFB735N0N14 | 3/8" | 400 Amps @ 12 VDC | Black |
| TFB735N8N02 | 3/8" | Kit:(1) TFB735N0N02 -(1) 751N8P00 | Red |
| TFB736N8N14 | 3/8" | Kit:(1) TFB735N0N14 -(1) 751N8P00 | Black |

751N8P00 Clear

Optional Cover  
Fuses Not Supplied

---

### 33 POWER POSTS (Imperial)

#### Single Point Pass Thru Power Post (Imperial)
| Part Number | Post | Colour | Max Amps | Max Voltage |
|---|---|---|---:|---|
| 77225N02 | 1/4" | Red | 150 | 0-48 VDC |
| 77225N05 | 1/4" | Yellow | 150 | 0-48 VDC |
| 77225N09 | 1/4" | Blue | 150 | 0-48 VDC |
| 77225N14 | 1/4" | Black | 150 | 0-48 VDC |
| 77231N02 | 5/16" | Red | 250 | 0-48 VDC |
| 77231N05 | 5/16" | Yellow | 250 | 0-48 VDC |
| 77231N09 | 5/16" | Blue | 250 | 0-48 VDC |
| 77231N14 | 5/16" | Black | 250 | 0-48 VDC |
| 77237N02 | 3/8" | Red | 350 | 0-48 VDC |
| 77237N05 | 3/8" | Yellow | 350 | 0-48 VDC |
| 77237N09 | 3/8" | Blue | 350 | 0-48 VDC |
| 77237N14 | 3/8" | Black | 350 | 0-48 VDC |

Allows for multiple connections on either side of barrier  
Allows current to be passed through panel  
Corrosion resistant hardware  
Lower cost alternative to power bushing  
Easy Installation using regular drill bits  
Blue-Dot Technology

Maximum Panel Thickness: 9.53mm  
Maximum Voltage: 48 VDC  
Maximum Amperage: Ref Chart @ 12 VDC  
Base Material: Glass-Filled Nylon  
Post: Ni-Plated Brass  
Inner Nuts (Conductive): Tin-Plated Brass  
Outer Nuts (Fastening: Stainless Steel)  
Spring Washers: Stainless Steel  
Flat Washer: Stainless Steel

Using 956 Series & 226 Series terminal insulators help comply with ABYC, USCG and ISO standards.

#### Single Point Waterproof Pass Thru Power Post (Imperial)
* Waterproof to IP67+

| Part Number | Post | Colour | Max Amps | Max Voltage |
|---|---|---|---:|---|
| 77231W02 | 5/16" | Red | 250 | 0-48 VDC |
| 77231W05 | 5/16" | Yellow | 250 | 0-48 VDC |
| 77231W14 | 5/16" | Black | 250 | 0-48 VDC |
| 77237W02 | 3/8" | Red | 350 | 0-48 VDC |
| 77237W05 | 3/8" | Yellow | 350 | 0-48 VDC |
| 77237W14 | 3/8" | Black | 350 | 0-48 VDC |

WATER PROOF  
BLUE-DOT TECHNOLOGY

---

## 35 POWER POSTS (Imperial) - Eight Point Power Post

Eight Point Power Post

| Part Number | Post | Colour | Amps* |
|---|---|---|---:|
| 77825N02 | 1/4" | Red | 160 |
| 77825N14 | 1/4" | Black | 160 |
| 77831N02 | 5/16" | Red | 160 |
| 77831N14 | 5/16" | Black | 160 |
| 77837N02 | 3/8" | Red | 160 |
| 77837N14 | 3/8" | Black | 160 |

Create reliable circuit paths to control systems  
(8) #8-32 Connection points carry up to 20 amps each @ 12 VDC  
Maximum Voltage: 48 VDC  
Mounting Centre: 63.5mm [2.5"]  

Insulation Kits available with 1, 2 or multiple cable entry  
INSULATION PACKAGES  
Contact us for further details on available insulation packages or please visit our website www.vte.nl

---

## 36-38 POWER BUSHINGS (Imperial)

### 36 Copper Core Power Bushing (Imperial)

Our Copper Core Jumper Bushings provide high current passing properties along with high torque strength.

Copper Core Power Bushing

| Part Number | Post | Amperages | Colour | (Weatherproof kit shown with W) |
|---|---|---|---|---|
| CCB376N0N02 | 3/8" | Norm:440 - Peak:550 | Red | (no W shown on that row) |
| CCB376N0N02W | 3/8" | Norm:440 - Peak:550 | Red | W |
| CCB376N0N05 | 3/8" | Norm:440 - Peak:550 | Yellow | - |
| CCB376N0N05W | 3/8" | Norm:440 - Peak:550 | Yellow | W |
| CCB376N0N14 | 3/8" | Norm:440 - Peak:550 | Black | - |
| CCB376N0N14W | 3/8" | Norm:440 - Peak:550 | Black | W |
| CCB376N0NR02 | 3/8" | Norm:440 - Peak:550 | F/Red | - |
| CCB376N0NR02W | 3/8" | Norm:440 - Peak:550 | F/Red | W |
| CCB376N1N02W | 3/8" | Norm:440 - Peak:550 | Red | W |
| CCB376N1N14W | 3/8" | Norm:440 - Peak:550 | Black | W |
| CCB376N1NR02W | 3/8" | Norm:440 - Peak:550 | F/Red | W |
| CCB378N02 | 3/8" | Norm:600 - Peak:750 | Red | - |
| CCB378N02W | 3/8" | Norm:600 - Peak:750 | Red | W |
| CCB378N05 | 3/8" | Norm:600 - Peak:750 | Yellow | - |
| CCB378N05W | 3/8" | Norm:600 - Peak:750 | Yellow | W |
| CCB378N14 | 3/8" | Norm:600 - Peak:750 | Black | - |
| CCB378N14W | 3/8" | Norm:600 - Peak:750 | Black | W |
| CCB506N02 | 1/2" | Norm:440 - Peak:550 | Red | - |
| CCB506N02W | 1/2" | Norm:440 - Peak:550 | Red | W |
| CCB506N05 | 1/2" | Norm:440 - Peak:550 | Yellow | - |
| CCB506N05W | 1/2" | Norm:440 - Peak:550 | Yellow | W |
| CCB506N14 | 1/2" | Norm:440 - Peak:550 | Black | - |
| CCB506N14W | 1/2" | Norm:440 - Peak:550 | Black | W |
| CCB516N02W | 1/2" | Norm:440 - Peak:550 | Red | W |
| CCB516N09W | 1/2" | Norm:440 - Peak:550 | Blue | W |
| CCB516N13W | 1/2" | Norm:440 - Peak:550 | Grey | W |
| CCB516N14W | 1/2" | Norm:440 - Peak:550 | Black | W |

---

### 37 POWER BUSHINGS - Copper Core Flange Bushing (Imperial)
Weatherproof part (”W”) includes:  
(1)x reinforced silicone gasket & (1)x 232N3 Series insulator

| Part Number | Post | Amperages | Colour |
|---|---|---|---|
| CCFB376N02 | 3/8" | Norm:440 - Peak:550 | Red |
| CCFB376N02W | 3/8" | Norm:440 - Peak:550 | Red |
| CCFB367N05 | 3/8" | Norm:440 - Peak:550 | Yellow |
| CCFB376N05W | 3/8" | Norm:440 - Peak:550 | Yellow |
| CCFB376N14 | 3/8" | Norm:440 - Peak:550 | Black |
| CCFB376N14W | 3/8" | Norm:440 - Peak:550 | Black |
| CCFB378N02 | 3/8" | Norm:600 - Peak:750 | Red |
| CCFB378N02W | 3/8" | Norm:600 - Peak:750 | Red |
| CCFB378N05 | 3/8" | Norm:600 - Peak:750 | Yellow |
| CCFB378N05W | 3/8" | Norm:600 - Peak:750 | Yellow |
| CCFB378N14 | 3/8" | Norm:600 - Peak:750 | Black |
| CCFB378N14W | 3/8" | Norm:600 - Peak:750 | Black |
| CCFB506N02 | 1/2" | Norm:440 - Peak:550 | Red |
| CCFB506N02W | 1/2" | Norm:440 - Peak:550 | Red |
| CCFB506N05 | 1/2" | Norm:440 - Peak:550 | Yellow |
| CCFB506N05W | 1/2" | Norm:440 - Peak:550 | Yellow |
| CCFB506N14 | 1/2" | Norm:440 - Peak:550 | Black |
| CCFB506N14W | 1/2" | Norm:440 - Peak:550 | Black |

WEATHER PROOF KIT

CCFB Mounted: Mounts with Bolts or Screws

---

### 38 POWER BUSHINGS - Copper Core Jumper Kits (Imperial)

Copper Core Jumper - Flush / Bracket mounting kits shown (text and lists)

Copper Core Jumper Bushing (part list shown on page)
- CCJB376FMK  
- CCJB376M0NR02  
- CCJB376M0N14  
- CCJB376BMK  

(Exact table entries on the page are as shown:)

| Part Number | Post | Amps Max Voltage | Colour |
|---|---|---:|---|
| CCJB376FMK | 3/8" | 350 | (not fully shown in text for that row) |
| CCJB376N0NR02 | 3/8" | 350 | Red |
| CCJB376N0N14 | 3/8" | 350 | Black |
| CCJB376BMK | 3/8" | 350 | Red & Black |

(Also described: copper core cold swaged into a hex shape; compatible with common ‘Double D’ punches.)

---

## Contact / Locations (from cover page)

USA FACTORY / HEADQUARTERS  
VTE Inc.  
5437 Robinson Road, Pellston Mi 49769 UNITED STATES  
P: 1 . 231 . 539 . 8000  
F: 1 . 231 . 344 . 5914  
E: info@vteworld.com  
W: www.vteworld.com

OCEANIC HEADQUARTERS  
VTE AUSTRALIA Pty Ltd  
Unit 3/15 Parramatta Road, Underwood QLD AUSTRALIA 4119  
PO Box 1301, Slacks Creek QLD AUSTRALIA 4127  
P: +61 (0)7 3808 8115  
E: sales@vteaustralia.com  
W: www.vteaustralia.com

EUROPEAN HEADQUARTERS  
VTE EUROPE BV  
Trapgans 8J Ankeveen 1244RL THE NETHERLANDS  
P: + 31 (0)35-656 5560  
E: info@vte.nl  
W: www.vte.nl