EG Electronics Logo
NEW
CML Micro MGX-445040-S5 10W GaN-on-SiC power amplifier in a 5 × 5 mm QFN package

CML Micro MGX-445040-S5 10W GaN-on-SiC Power Amplifier

10W GaN power amplifier delivering 40 dBm output, 13 dB gain and 55% efficiency across 4.4–5.0 GHz.

Product sheet

Main Features

Description

CML Micro MGX-445040-S5 – 10W GaN-on-SiC Power Amplifier

The 10W GaN power amplifier MGX-445040-S5 from CML Micro delivers high RF output power, efficient operation and compact integration for advanced wireless communication systems. Operating across 4.4–5.0 GHz, this single-stage C-band amplifier provides 40 dBm (10 W) saturated output power and 13 dB small-signal gain.

CML Micro uses gallium nitride on silicon carbide (GaN-on-SiC) technology to combine high-frequency performance with effective thermal management. As a result, the MGX-445040-S5 is well suited to demanding RF applications where space, power efficiency and signal performance are important.

High RF Performance and Power Efficiency

The MGX-445040-S5 delivers 55% typical power-added efficiency at saturated output power, measured at 4.7 GHz. This efficient design helps reduce the power lost as heat during RF amplification.

Furthermore, the amplifier provides 13 dB typical small-signal gain at 4.4 GHz and 13.5 dB at 4.7 GHz and 5.0 GHz. These characteristics support consistent amplification across its specified operating frequency range.

The device also offers a typical output third-order intercept point (OIP3) of 45 dBm under the manufacturer's specified test conditions. Therefore, engineers can consider it for communication systems that require both output power and linearity.

Compact Design with Simplified RF Integration

The 10W GaN power amplifier comes in a compact 5 × 5 mm, 32-lead air-cavity QFN package.

Both RF ports are nominally matched to 50 Ω and include integrated DC-blocking capacitors. Consequently, designers can simplify the RF signal path and reduce the need for external matching and DC-blocking components.

The device operates with a recommended 28 V drain supply and a typical quiescent current of 56 mA. Its thermally enhanced package includes an exposed ground pad that provides an important path for heat transfer into the PCB.

Applications in MANET, UAV and 5G Infrastructure

The MGX-445040-S5 supports several advanced wireless communication applications.

MANET mesh radio systems: The amplifier can serve as a final-stage RF power amplifier in portable and mobile ad-hoc network equipment. These networks enable communication without depending on fixed infrastructure.

UAV datalinks: Its compact package and RF output capability make it suitable for communication links between unmanned aerial vehicles and ground systems. Applications include telemetry, command links and wireless data transmission.

5G NR cellular infrastructure: The amplifier can also operate as a high-power RF driver in equipment designed for the n79 frequency band, within its specified 4.4–5.0 GHz range.

Thermal Management and Development Support

Reliable RF amplifier operation depends on effective PCB layout and thermal design. Therefore, engineers must connect the exposed package pad to the PCB ground plane and provide suitable thermal vias and heat dissipation.

The MGX-445040-S5EV evaluation board supports device testing and application development. It provides a practical reference for RF circuitry, grounding and thermal implementation.

RF Amplifier Solutions from EG Electronics

The CML Micro MGX-445040-S5 offers a compact solution for engineers developing high-power C-band communication equipment. Its combination of 10 W saturated output power, 55% typical efficiency and integrated 50 Ω RF interfaces helps address demanding RF design requirements.

Contact EG Electronics to discuss the MGX-445040-S5, technical documentation and requirements for your next RF communication project.

Specifications

SpecificationValue

Manufacturer CML Micro
Part number MGX-445040-S5
Product type Single-stage C-band GaN-on-SiC linear power amplifier
Frequency range 4.4–5.0 GHz
Saturated output power (P3dB) 40 dBm (10 W), typical
Small-signal gain at 4.4 GHz 13 dB, typical
Small-signal gain at 4.7 GHz 13.5 dB, typical
Small-signal gain at 5.0 GHz 13.5 dB, typical
Power-added efficiency 55% typical, at saturated output, 4.7 GHz
Reverse isolation −27 dB, typical
OIP3 45 dBm, typical; 4.7 GHz, 33 dBm per tone, 20 MHz spacing
ACPR 35 dBc, typical; 4.7 GHz, 32 dBm avg output, 256-QAM
EVM 3%, typical; 4.7 GHz, 32 dBm avg output, 256-QAM
Input return loss 10 dB, typical
Output return loss 10 dB, typical
RF port impedance Nominal 50 Ω; integrated DC blocking at input and output
Recommended drain voltage 28 V
Recommended gate voltage −4.5 V min; −2.35 V typical; −2.2 V max
Quiescent drain current 56 mA, typical
Power-down gate voltage −3 V, typical
Drain current at Psat 670 mA, typical at 4.7 GHz
Standby current 100 µA, typical at Vg = −4.5 V, no RF input
Recommended case temperature −40 to +85 °C
Thermal resistance, junction-to-case 3.6 °C/W (Tc = 85 °C)
Package 32-lead 5 × 5 mm thermally enhanced plastic air-cavity QFN (AQFN-32L)
Package dimensions 5 × 5 mm
RF input pin 3
RF output pin 22
Drain supply pins (VDD) 26, 27
Gate bias pin (VGG) 31
Ground pins 4, 21 and exposed die pad
Applications MANET portable radios; UAV datalinks; 5G NR cellular infrastructure (n79)
Ordering part number MGX-445040-S5 (tape and reel)
Evaluation board MGX-445040-S5EV
RoHS Manufacturer declares compliance with 2011/65/EU as amended by (EU) 2015/863
REACH Manufacturer statement provided in datasheet

Get in touch

Manufacturers

Manufacturer
EG Electronics Logo

We deliver electronic and electromechanical components and system solutions to companies worldwide. With over 80 years of expertise, we offer standard products from top suppliers alongside our own world-leading custom solutions. From concept to delivery, and beyond.

© EG Electronics | A part of Kamic Group | By nkel

Linkedin for EG Electronics